Please select the correct installation diagram The “clean” side is the fresh air the system draws in. The installation of this product in your vehicle requires.
DIY - Cheapo Oil catch Can - Team-BHP
Then to draw the vapors out you will need to run a hose from the rear of the drivers side valve cover routed around the rear of the engine up to the catch can location at the front of the passenger side.
Select a location to mount the catch can
Keep in mind the sight glass and drain plug access A firewall or inner fender is good a place You can point the fitting in any of six directions Firstly, identify the location for the catch can and mount the bracket securely
The location should be accessible for future maintenance while not interfering with other engine components or. When the temperature outside approaches freezing, your catch can should be cleaned on a weekly basis to prevent freeze up of the crank vent system and damage to engine seals. You have your can setup backwards At least compared with how the factory pcv is usually setup (and how i have mine)
